Only need 15S!! Rapid and high accuracy portable ATP meter hygiene system with swab

ATP Product Description:

FD02 ATP Fluorescence Rapid Detector for rapid detection of microorganisms in food and drinking water, rapid detection of tableware cleanliness, food processing equipment, worktops, food and beverage utensils and other disinfection results of rapid detection, medical environment work platform for immediate assessment.

The device uses biochemical reaction to detect ATP content. When used, samples are collected with pre-wetted water swabs, and the ATP swab is wetted with buffer, which helps to extract the biological material (ATP) from a dry or moist surface. The swab contains a reagent that cleaves the cell membrane, which releases the intracellular ATP and reacts with the specific enzyme contained in the reagent to produce light. The luminescence value is measured by a fluorescence illuminance meter. The number of microorganisms is proportional to the luminous value.

Liquswab

Normal swab

Instrument features:

High sensitivity - 5X10-18mol / ATP

Speed - conventional culture method 18-24h or more, and ATP only need a dozen seconds.

Feasibility - The number of microbes has a clear correlation with the ATP contained in the microorganisms. By detecting the ATP content, the number of microorganisms in the reaction can be obtained indirectly.

Maneuverability - Traditional training methods need to be carried out by trained technicians in the laboratory; and the ATP fast cleanliness detection operation is very simple and can be operated by the general staff only by simple training.

Production of the ATP fluorescence detector was the Ministry of Science and Technology "scientific and technological innovation projects"

l The main parameters:

1, large screen clear LCD display

u 2, the detection accuracy: 5 × 10-18mol / ATP?

u 3, detection range: 0 to 9999 RLUs

u 4, detection time: 15 seconds

u 5, detection error: ± 5 RLUs

u 6, the operating temperature range: 5 ℃ to 40 ℃

u 7, the operating humidity range: 20-85%

8, ATP recovery: 90-110%

9, detection mode: RLU, coliform screening

u 10,50 user ID settings

u 11, can set the number of results limit: 250

u 12,2000 memory storage

u 13, automatically determine the qualified

u 14, automatic statistical pass rate

u 15, built-in self-calibration light source

u 16, boot 30 seconds self test

u 17, with RS232 interface (with USB interface), the results can be uploaded to the PC

u 18, instrument size (W × H × D): 192mm × 87mm × 34mm

u 19, the use of two standard 5 batteries or rechargeable lithium battery

u 21, standby state (20 ℃): 6 months

u 22, Chinese operation manual

u 23, stable liquid luciferase

u 24, wetting the integrated collection of swabs